.jpg?maxX=540&maxY=360)
A panel at a recent Wharton Global Forum in Tokyo titled, "Global Supply Chain Management:
Boeing's main customer base has evolved since 20 years ago, when 75% of the company's production took place in the United States and Europe, with the rest happening elsewhere. Now, just 25% of Boeing's backlog is in its traditional markets in the U.S. and Europe, with 75% in fast-growing economies like China and India. Thus, Boeing's vast supply chain is evolving to fit its changing market and advancing technologies.
Last year, the manufacturer sourced 783 million parts used to build 600 aircraft. By 2014, it will be bringing in more than one billion parts from a total of 7,500 suppliers to build 700 planes. "It's a vast supply chain and very complex," Anderson said of the 500,000 people in 73 countries engaged in helping to build Boeing products. "It [takes] really well choreographed logistics ... to bring those airplanes together." She noted that even a seemingly simple window shade is sourced from seven suppliers.
Like most manufacturers, Boeing is contending with immense competition, and that means its choice of suppliers has to enhance its competitive advantage. Ultimately, "it all comes down to safety," Anderson said. Each of Boeing's 7,500 suppliers is held to the same standards the company requires of itself. Optimizing its supply chain and other qualities such as fuel efficiency and aerodynamics enabled Boeing to gain 35% in efficiency between 1975 and 1995, but airlines are demanding still more improvements. "Our world has changed dramatically," Anderson noted. "To be competitive, we are working with our supply chain. We're looking at whom we work with, [and] how we change the engineering, the architecture."
Boeing's manufacturing processes have been in the spotlight lately because of the company's high-tech 787 Dreamliner, which suffered from delays, cost overruns and, after its launch, high-profile battery problems. Last week, an empty 787 Dreamliner caught fire while parked at London's Heathrow Airport. Boeing, along with Great Britain's Air Accidents Investigation Branch, the U.S. National Transportation Safety Board and Honeywell, maker of the emergency device located in the area where the fire appeared to be burning, is investigating the possible causes of the incident.
Ultimately, Boeing seeks to minimize risk and maximize the value of its supply chain by gauging the capability, capacity, collaboration, cash and commitment of its suppliers. It also has to work with aspiring partners in emerging markets such as China, despite potential risks from technology transfers. "It's a balancing act. We don't want to say, 'No, we're not going to share,' because we would be shutting ourselves out of the market. But we have to decide when we have to say no," Anderson noted.
Where, and How Many?
Japanese aircraft maker and defense contractor Mitsubishi Heavy Industries, whose company has worked closely with Boeing on the 787 and other planes, is also balancing its domestic manufacturing base with the need to expand into global markets, said Shigefumi Tatsumi, the company's vice president and general manager for commercial aircraft. The company makes at most 50 of its best-selling aircraft in a month, with lead times that are often over a year. "We have a very flat supply chain, which is not good for the current business environment," noted Tatsumi. Key considerations are location and quality assurance.
Nissan Motors faces similar challenges, according to Vincent Cobee, corporate vice president in the automaker's Global Datsun Business Unit. Nissan's supply chain, like Boeing's, has been transformed by globalization and the emergence of newly affluent markets outside of North America, Europe and Japan. The shift of production to offshore markets to help defuse trade friction ended the traditional reliance of Japanese automakers on marketing through the big Japanese trading houses. That transition was followed by a shift toward localization across many markets.
While Nissan maintains full control over development of its vehicles, it has had to localize supply chains to reduce costs and reach its key markets. The automaker uses several different business models. The premium brand, Infiniti, is competitive with German luxury cars and developed and made in Japan. The global Nissan product is developed in Japan but localized for various markets. Finally, there is Datsun, which Cobee calls a global-local product, developed and sourced locally with Japanese expertise.
For high-tech products, supply chain logistics can be even more daunting, said Kenji Mizuno, a senior vice president in electronics maker Fujitsu's supply chain management unit. Unlike aircraft and cars, Fujitsu's products are often invisible to consumers, but there are similar pressures to ensure that goods are delivered quickly enough to meet customers' requirements. Fujitsu counts among its clients nearly half of all Fortune 500 global companies and it is the world's third-largest IT service provider, with 173,000 employees and 4.4 trillion yen in annual sales.
Rather than thousands of suppliers, Fujitsu relies on only a handful for each of the many components used in its X86 servers, which Mizuno cited as an example. It buys CPUs from Intel and AMD, and hard disc drives from Seagate and Toshiba. The realities of the supply chain, and high expectations of Fujitsu's customers, mean that Fujitsu has to source parts from suppliers that have moved offshore to China and elsewhere in Asia, and keep costs low, while providing high quality and high reliability and managing grueling time limitations.
Despite the small number of suppliers, Fujitsu must provide servers tailored to meet up to 20,000 configurations, Mizuno said. Fujitsu's solution to the dilemma of scattered suppliers and short delivery times of five or six days is to buy parts from China or from members of the Association of Southeast Asian Nations (ASEAN), ship them by sea freight and have them ready for final assembly close to its customers' locations in Japan, Europe and China. "We assemble the products, put them through long tests and deliver. This is the only scenario that allows us to make money and meet all the other requirements," Mizuno noted.
To manage its myriad supply chains, Fujitsu has opted for a "virtual global SCM" (supply chain management system) to decide who will make and deliver products. "We are doing this every day. We look at the customer orders, factory lines and parts supplies. This is the only way we can do it," Mizuno said. Tokyo Electron, which makes the chip sets used in Sony Play Stations and other devices, faces similar requirements for high reliability and quality but has a less open approach to its own supply chain, noted Akihisa Sekiguchi, the company's vice president and general manager for corporate marketing. Tokyo Electron produces mainly for export, though only eight customers account for almost all its business.
No Single Solution
Although it is not that well-known to consumers, Tokyo Electron once was number one in the integrated circuit industry, back when Japan was the leading manufacturer of semiconductors. Now, it is at the top in Japan and number three in the world, with 12,000 employees and $5 billion to $7 billion in annual sales. The firm's manufacturing is all done in Japan, though it ships 90% of its products overseas. "Our R&D is global, but sourcing is domestic," Sekiguchi said. Keeping production onshore works for Tokyo Electron because the components needed to make its tools are made in Japan, and the country's infrastructure can support its manufacturing.
Apart from trials related to years of "endaka," or the high-valued yen, Tokyo Electron's biggest challenge came with the March 2011 earthquake and tsunami, which forced its factory in Fukushima to close for about two months. The company's workers pulled together to get production back up as soon as possible, though "it takes time to track down 4,000 or 5,000 suppliers," Sekiguchi noted. Calamities like the March 2011 disasters drove home the need to mitigate risk through multi-sourcing. But it does involve costs. "It's not an easy solution," Sekiguchi said. "IP protection is an issue. Geographic location is an issue."
Ultimately, there is no single solution that works in all cases. The question of IP protection is vital to supply chain management, Cohen noted during the panel discussion. But for companies like Boeing, the extremely high degree of regulation typically helps to prevent bogus parts from getting into the industry. "Mostly the regulators do the policing. We just ensure that all the parts have the right documentation," Anderson said.
Automakers like Nissan face much greater risks, given the prevalence of independent auto service companies in many markets. "It's very difficult to guarantee the source of the parts. Our badge is on the car no matter where the parts come from," Cobee noted. "I recommend not using an unauthorized dealer in China."
Partly out of those concerns, some consumers are choosy about the origin of the products they buy. But for IT companies like Fujitsu, although components are made in various places, from Costa Rica to Israel, "we can boast that our products are made only in Japan," said Mizuno. "The real issue is reliability and capability. We do very special tests, and sometimes many components fail. But when we deliver the finished computers, they are very high quality. That's our expertise. They are made and assembled in Japan with our technology."
Tokyo Electron, likewise, uses components from overseas but puts its products through extensive testing before they are shipped. "If components fail, they are dropped," Sekiguchi said of the tests, which extend to the "molecular level. In the semiconductor industry, we buy the product, not the location or the source."
Stretching to reach global markets involves risks, as Boeing's experience with the 787 attests. Yet, outsourcing is something Boeing will continue to do, even if the company found that it went a bit too far with the Dreamliner.
"We had an expectation that our suppliers could do the same things that we do every day. We learned that stuffing an airplane full of parts, [something that] we take for granted, is ... challenging," Anderson noted. "We'll take our expertise and start getting the next new airplane on the books. We're taking advantage of the expertise around the world. We can't believe we're the only ones who can do it." According to Tatsumi of Mitsubishi Heavy Industries, working with Boeing is an elaborate process involving hundreds of engineers and a collaboration that has to evolve as the products and market environment change.
Companies must realize that once they have opened the door to collaboration or outsourcing, though, it can never be closed, noted Nissan's Cobee. Given the huge risks of failure for products like automobiles and many other products, "you have to think about not only the benefit for tomorrow but also about whether you can sustain it." To keep a competitive edge requires constant innovation. "You have to innovate more than the others. Yes, we have the daily job of protecting IP. It doesn't take a genius to dismantle a car and reverse engineer it," Cobee said. "The only way is innovation."
This story was originally published by Knowledge@Wharton.