I built and played Nintendo's next big thing, Nintendo Labo - and it was a surprisingly brilliant learning tool

It's important to note here that you need a Nintendo Switch to play Nintendo Labo games. Labo is essentially a game for the Switch that comes with buildable toys, though that's underselling it.

Each Labo build begins with a large sheet of relatively thin cardboard. The cardboard doesn't feel especially tough, but the final creations made with the cardboard are tougher than you'd think.  

The RC Car, for instance, begins with the sheet of cardboard seen above. Various shapes are perforated from the cardboard, which get punched out per a set of very charming instructions.

Here's the final product:

You could, of course, just punch out everything immediately — and some people assuredly will do that, especially little kids. That's fine. The instructions will still identify each piece and explain how they all fit together. 

Labo, as I discovered, is tremendously forgiving. Just like cardboard! That's kind of the point.

The process of building Nintendo Labo is akin to something like building Lego. You've got all the right pieces, and an idea of what the final design should look like — there are instructions, and you follow them.

Immediately with Labo, Nintendo's deft hand for presentation and charm is evident. You may notice a Switch console pictured above — on it, instructions for how to build this particular Labo are displayed. The pieces of cardboard you're supposed to be using are displayed, and they are rotatable. You can zoom in or out, and you're given direct control of the animations that play out — hold down the button to see the animation, or to rewind it. 

After the pieces of cardboard are punched out, they need to be molded into whatever object you're creating. What that means for many of the simplest Labo is a lot of pre-folding, to condition various pieces of cardboard before they're folded together. 

The instructions that get you there are tremendously charming, and the way you interact with the instructions is smartly done. Various components of the construction are even given adorable nicknames like "Mama Bear" and "Baby Bear."

The spirit of Nintendo Labo is the same one that drives model airplane building, or ham radio creation, or even PC construction. There's no rush with Labo, or competition. It's about the experience of building something, which is fundamentally a learning process.

The entire experience feels centered on teaching foundational concepts: following a set of instructions, using spacial identification, logically deducing where the instructions are going, and much more. 

In the same way that building a birdhouse teaches a variety of broad concepts, so does Labo — but updated significantly for a generation born into smartphones.

Much of what makes Labo so cool is what you can do with it after you build it.

As you can see above, the "RC car" is actually this bug-looking thing. By using the vibration of the Nintendo Switch controllers (the "Joy-Con"), the "car" rattles along the hard surface. The way the cardboard creations ("Toy-Con") come to life is by adding in various components of the Nintendo Switch – either the Joy-Con controllers or the console itself (the tablet).

It looks like it wouldn't work, right? It totally works.

More amazing, the "car" has a little window in front where an infrared camera points out. It can respond to heat (read: your hand), or a variety of sensors that come with the kit. The use of the Switch controller's IR camera is prevalent throughout the varios Labo creations — a relatively low-tech solution that lends a surprising amount of high-tech magic to what is otherwise a neat cardboard construction.

The coolest thing I did at the Nintendo Labo event, by a long shot, was play this cardboard piano. It's one of the five Labo creations you can make using the Variety Kit, and it's incredibly impressive. 

The keys, as promised, make music come out of the Switch. The one at the event was hooked up to a small speaker, which made the experience all the more delightful. You can change the sounds that come out of the piano by using various cardboard components that plug directly into it:

The tape on each one tells the Switch to change the tone from the piano keys. They can also be twisted while inserted, which changes the pitch. It feels like Google Cardboard for digital music production — it's basically a cardboard MPK Mini.

If you're a parent with a Nintendo Switch, Labo is a no-brainer. It's a sneaky way of teaching your kids a bunch of important stuff while having a good time! Win-win! 

But what about the folks who grabbed Switch for "Zelda"? Labo is almost certainly for you as well. Though some of the creations are simple, many of them are far more involved. The fishing pole uses washers and grommets! 

You — adult human, presumably who has built things before — will still have to work at building Labo's more detailed Toy-Con constructions. It will take time and brain power. If you're anything like me, you'll delight in the process. 

Building Labo is fun! I was disappointed to learn that I couldn't take my creations home with me.

A software tool called "Toy-Con Garage" was shown at the event — it was also briefly teased in a video released by Nintendo (as seen above).

The premise of the tool is basic programming. Maybe you want the left Joy-Con to vibrate when you tap on the Switch screen, for instance. Or maybe — as was the case at the event — you want the Switch screen to act as a kind of guitar that's placed in the middle of a cardboard guitar.

The point is that, beyond just the creations Nintendo has proposed, you're able to re-program the console as you wish. There's a level of depth to Labo that undercuts the simplicity of its appearance. It's a toy construction set, and a set of video games, and a STEM learning device. 

It's something new from Nintendo that also feels entirely famililar.